The BAARS company possess the most technically advanced static probing equipment in the world.
We use probes produced by the reputable company Geomill.
Equipment category:
- according to NGI – 1
- according to Technical Committee TC – 16
- International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE) – 1
Our static probe is equipped with equipment that allows to perform penetration tests according to international standards, such as:
- NEN 3680,
- NEN 5140,
- DIN 4094-1,
- NF P94-113,
- ISO 22476-1,
- ISO 22476-12,
- Eurocode 7,
- ISSMGE standard ASTM D3441-98,
- ASTM D5778-07,
- ASTM D6067-96 includes 1 class CPTU tests with piezocones and tests of dissipation.
Technical specification of CPT Truck 200 kN |
|
Weight |
22 tonnes |
Maximum technical pressure force |
22 tonnes |
Maximum operational pressure force |
20 tonnes |
Maximum passage speed |
80 km/h |
Support type |
4 supports (2 at the front, 2 at the back) |
Maximum terrain slope for test |
15° |
Maximum terrain slope for passage |
20° |
Noise level |
during the test –79 dBA |
during the drive –84 dBA |
|
Fuel type |
ON |
Hydraulics |
non-biodegradable |
Technical specification E - CPT(U) measurement system |
||
Cone models |
CFI, CFII, CFIP, CFIIP |
|
Cone type and diameter |
"10" 36mm |
"15" 44mm |
"Qc" cross-sectional area |
10cm2 |
15cm2 |
"Fs" friction sleeve surface |
150cm2 |
200cm2 |
Maximum pore pressure |
2MPa |
|
Measurement system |
Geologger 8/24P or GME 500 |
|
Met standards |
NEN 3680 |
Technical specification S - CPT(U) measurement system |
|
Cone models |
CFI, CFII,CFIP,CFIIP |
Cone type and diameter |
"15" 44mm |
"Qc" cross-sectional area |
15cm2 |
"Fs" friction sleeve surface |
200cm2 |
Maximum pore pressure |
2MPa |
Measurement system |
Geologger 8/24P or GME 500 |
Met standards |
3 seismic |
Measurement instrument |
Seismic system |
Met standards |
ISSMGE |