Telefon +48 604 218 377

  Email This email address is being protected from spambots. You need JavaScript enabled to view it.

choose language

Platforma CPT

CPT PLATFORMA

koparkaBAARS owns the most technologically advanced equipment in the world that is used to conduct CPT soundings. We utilize the equipment from renowned Dutch companies, which are some of the most important CPT and CPTU sounding equipment manufacturers. The CPT Platform is an ultra-light testing unit owned by BAARS and intended for very specialized tasks. Attached to an excavator arm, it will operate in location unavailable to other testing equipment. It can be placed on barges, and will conduct tests on water without any problems. The CPT Platform is able to reach a push force of up to 200 kN.

The CPT Platform is perfect for investigations in demanding conditions – in places where access is hindered, e.g., by peat bogs, swamps, forest areas, flood embankments, highly urbanized areas, railway stations and routes. Our probe is equipped with testing equipment that complies with the following standards: IGO 1, ISO 22476, Eurocode 7, ISSMGE and ASTM.
Furthermore, within our operations we also use a Marchetti’s dilatometer for DMT tests, equipped with a state-of-the-art control system, a seismic module and the only VIDEOCONE in Poland.

Efficiency

Depending on the test type.

Versatility

On-land, on-water and railroad area testing.

Mobility

Investigations in any conditions and location.

 

Equipment category:

  • first acc. to NGI
  • TC 16 acc. to the Technical Committee
  • first acc. to International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE)

Our CPT probe is equipped with instruments that enable conducting penetration tests in compliance with such international standards as:

  • NEN 3680,
  • NEN 5140,
  • DIN 4094-1,
  • NF P94-113,
  • ISO 22476-1,
  • ISO 22476-12,
  • Eurocode 7,
  • ISSMGE standard ASTM D3441-98,
  • ASTM D5778-07,
  • ASTM D6067-96 Covers class 1 CPTU piezocone tests and dissipation tests,
  • IGO 1.

Technical Specification of the CPT 200 kN platform

Weight

2.0 tons

Maximum technical pushing force

20 tons (200kN)

Maximum operating pushing force

20 tons (200kN)

Maximum travel speed

------

Anchoring type

none

Maximum terrain slope for test

no limits

Maximum terrain slope for travel

no limits

Noise level

when testing – 76 dBA

when driving – 62 dBA

Fuel type

Diesel oil

Hydraulics

not biodegradable

 

Platforma CPT 11
Platforma CPT 10
Platforma CPT 9
Platforma CPT 8
Platforma CPT 7
Platforma CPT 6
Platforma CPT 5
Platforma CPT 4
Platforma CPT 3
Platforma CPT 2
Platforma CPT 1
Big Crawler na polu trawy

Big Crawler

Big CrawlerBAARS company owns the most technologically advanced equipment in the world that is used to conduct cone penetration soundings. We utilize the equipment from renowned Dutch companies, which are some of the most important CPT and CPTU sounding equipment manufacturers. We utilize a BIG CRAWLER 200 kN machine. Its advantages include ballast chassis, which results in no need for anchoring prior to commencing work. The BIG CRAWLER will easily reach any terrain, regardless of whether it is a road pavement, post-industrial site or a beach.
The unit can be controlled externally, which enables the operator to conduct very precise manoeuvres and precisely reach a test location.
This compact crawler unit can be hauled aboard a barge to conduct soundings on water.

Furthermore, within our operations we use a Marchetti’s dilatometer equipped with a state-of-the-art control system, a seismic module and the only VIDEOCONE in Poland.
Efficiency
Even up to 200 linear metres per day.
Versatility
Land and water testing.
Subsoil investigations in any conditions and location.

Equipment category:

  • first acc. to NGI
  • TC 16 acc. to the Technical Committee
  • first acc. to the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE)

Our static probe is equipped with instruments that enable conducting penetration tests in compliance with such international standards as:

  • NEN 3680,
  • NEN 5140,
  • DIN 4094-1,
  • NF P94-113,
  • ISO 22476-1,
  • ISO 22476-12,
  • Eurocode 7,
  • ISSMGE standard ASTM D3441-98,
  • ASTM D5778-07,
  • ASTM D6067-96 Covers class 1 CPTU piezocone tests and dissipation tests.

pojazd gąsienicowy 1
pojazd gąsienicowy 2
pojazd gąsienicowy 3
pojazd gąsienicowy 4
pojazd gąsienicowy 5
pojazd gąsienicowy 6
pojazd gąsienicowy 7
pojazd gąsienicowy 8
pojazd gąsienicowy 9
pojazd gąsienicowy 10
pojazd gąsienicowy 11

truck

CPT Truck Man 200 kN

ciężarówkiBAARS company owns the most technologically advanced equipment in the world that is used to conduct cone penetration soundings. We utilize the equipment from renowned Dutch companies, which are some of the most important CPT and CPTU sounding equipment manufacturers. We own a 200 kN CPT CRAWLER transported on a MAN TRUCK car set. It is the largest and heaviest research unit in our machine park.  Its advantages include ballast chassis, which results in no need for anchoring prior to commencing work. It combines a specialized truck with a BIG CRAWLER. If necessary, a crawler unit can be removed from the car body and conduct testing in hard-to-reach areas.
Furthermore, within our operations we use a Marchetti’s dilatometer equipped with a state-of-the-art control system, a seismic module and the only VIDEOCONE in Poland.
Efficiency
Even up to 200 linear metres per day.
Versatility
On-land and on-water testing.
Mobility
Subsoil investigations in any conditions and location.

Equipment category:

  • first acc. to NGI
  • TC 16 acc. to the Technical Committee
  • first acc. to the International Society for

Soil Mechanics and Geotechnical Engineering (ISSMGE)
Our static probe is equipped with instruments that enable conducting penetration tests in compliance with such international standards as:

  • NEN 3680,
  • NEN 5140,
  • DIN 4094-1,
  • NF P94-113,
  • ISO 22476-1,
  • ISO 22476-12,
  • Eurocode 7,
  • ISSMGE standard ASTM D3441-98,
  • ASTM D5778-07,
  • ASTM D6067-96 Covers class 1 CPTU piezocone tests and dissipation tests.
  • ASTM D6067-96 Obejmuje klasy 1 piezstożkowe testy CPTU i testy dyssypacji.
Technical Specification CPT Truck MAN 200 kN
Weight 24 tons
Maximum technical pushing force 22 tons (220kN)
Maximum operating pushing force 20 tons (200kN)
Maximum travel speed 90 km/h
Support type 4 supports (2 at the front, 2 at the back)
Maximum terrain slope for test 15°
Maximum terrain slope for travel 20°
Noise level when testing – 79 dBA
  when driving – 84 dBA
Fuel type Diesel oil
Hydraulics not biodegradable

 

samochód ciężarowy i operator
samochód ciężarowy i operator 2
samochód ciężarowy 1
samochód ciężarowy 2
samochód ciężarowy 3

Mini Crawler

MINI CRAWLER

Urządzenie do sondowaniaBAARS owns the most technologically advanced equipment in the world that is used to conduct CPT static probe soundings. We utilize the equipment from renowned Dutch companies, which are some of the most important CPT and CPTU sounding equipment manufacturers. The Mini Crawler is a lightweight, self-propelled crawler unit owned by BAARS and intended for special tasks. Rubber, extendable crawler tracks enable travelling on soft and hard ground. Mini Crawler has 4 disc anchors that enable achieving a pushing force of up to 200 kN.

Mini Crawler is perfect for investigations in demanding conditions – in places where access is hindered, e.g., by peat bogs, swamps, forest areas, flood embankments, highly urbanized areas, railway stations and routes. Our probe is equipped with testing equipment that complies with the following standards: IGO 1, ISO 22476, Eurocode 7, ISSMGE and ASTM.

Furthermore, within our operations we also use a Marchetti’s dilatometer for DMT tests, equipped with a state-of-the-art control system, a seismic module and the only VIDEOCONE in Poland.

Efficiency

Even up to 50 linear metres per day.

Versatility

Testing on land and between single-track rails.

Mobility

Investigations in any conditions and location.

 

Equipment category:

  • first acc. to NGI
  • TC 16 acc. to the Technical Committee
  • first acc. to International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE)

Our static probe is equipped with instruments that enable conducting penetration tests in compliance with such international standards as:

  • NEN 3680,
  • NEN 5140,
  • DIN 4094-1,
  • NF P94-113,
  • ISO 22476-1,
  • ISO 22476-12,
  • Eurocode 7,
  • ISSMGE standard ASTM D3441-98,
  • ASTM D5778-07,
  • ASTM D6067-96 Covers class 1 CPTU piezocone tests and dissipation tests,
  • IGO 1.

 

Technical Specification Mini Crawler 200 kN

Weight

2.7 tons

Maximum technical pushing force

20 tons (200kN)

Maximum operating pushing force

20 tons (200kN)

Maximum travel speed

6 km/h

Anchoring type

4 disc anchors

Maximum terrain slope for test

25°

Maximum terrain slope for travel

20°

Noise level

when testing – 76 dBA

when driving – 62 dBA

Fuel type

Diesel oil

Hydraulics

not biodegradable

 

Mini Crawler 6
Mini Crawler 7
Mini Crawler 8
Mini Crawler 9
Mini Crawler 10
Mini Crawler 12
Mini Crawler 14
Mini Crawler 5
CPT Truck Steyr 200 kN

CPT TRUCK STEYR 200 KN

Ciężarówka 2BAARS owns the most technologically advanced equipment in the world that is used to conduct CPT soundings. We utilize the equipment from renowned Dutch companies, which are some of the most important CPT and CPTU sounding equipment manufacturers. We own a 200 kN CPT TRUCK on a STEYR car set. Its advantages include ballast chassis, which results in no need for anchoring prior to commencing work. The machine is equipped with a system for drilling, e.g., foundations, breakstone, concrete, asphalt etc.

Furthermore, within our operations we also use a Marchetti’s dilatometer for DMT tests, equipped with a state-of-the-art control system, a seismic module and the only VIDEOCONE in Poland.

 

Efficiency

Even up to 200 linear metres per day.

Versatility

On-land and on-water testing.

Mobility

Investigations in any conditions and location.

 

Equipment category:

  • first acc. to NGI
  • TC 16 acc. to the Technical Committee
  • first acc. to International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE)

 

Our CPT rig is equipped with instruments that enable conducting penetration tests in compliance with such international standards as:

  • NEN 3680,
  • NEN 5140,
  • DIN 4094-1,
  • NF P94-113,
  • ISO 22476-1,
  • ISO 22476-12,
  • Eurocode 7,
  • ISSMGE standard ASTM D3441-98,
  • ASTM D5778-07,
  • ASTM D6067-96 Covers class 1 CPTU piezocone tests and dissipation tests,
  • IGO 1.

Technical Specification CPT Truck Steyr 200 kN

Weight

20 tons

Maximum technical pushing force

20 tons (200kN)

Maximum operating pushing force

19 tons (190kN)

Maximum travel speed

80 km/h

Support type

3 supports (2 at the front, 1 at the back)

Maximum terrain slope for test

15°

Maximum terrain slope for travel

20°

Noise level

when testing – 74 dBA

when driving – 82 dBA

Fuel type

Diesel oil

Hydraulics

not biodegradable

 

CPT Truck Steyr 200 kN 4
CPT Truck Steyr 200 kN 3
CPT Truck Steyr 200 kN 2
CPT Truck Steyr 200 kN 1